IRI: http://www.w3.org/ns/ssn/systems/Accuracy
IRI: http://esonetyellowpages.com/vocab/AcousticDopplerCurrentProfiler
An acoustic Doppler current profiler (ADCP) is a hydroacoustic current meter similar to a sonar, attempting to measure water current velocities over a depth range using the Doppler effect of sound waves scattered back from particles within the water column.
IRI: http://www.w3.org/ns/sosa/ActuatableProperty
An actuatable quality (property, characteristic) of a FeatureOfInterest.
IRI: http://www.w3.org/ns/sosa/Actuation
An Actuation carries out an (Actuation) Procedure to change the state of the world using an Actuator.
IRI: http://www.w3.org/ns/ssn/systems/ActuationRange
The set of values that the Actuator can return as the Result of an Actuation under the defined Conditions with the defined system properties.
IRI: http://www.w3.org/ns/sosa/Actuator
A device that is used by, or implements, an (Actuation) Procedure that changes the state of the world.
IRI: http://www.w3.org/ns/ssn/systems/BatteryLifetime
Total useful life of a System's battery in the specified Conditions.
IRI: http://esonetyellowpages.com/vocab/CarbonDioxide
IRI: http://esonetyellowpages.com/vocab/CellSize
IRI: http://esonetyellowpages.com/vocab/CO2Pro
PRO OCEANUS Submersible pCO2 Sensor
IRI: http://www.w3.org/ns/ssn/systems/Condition
Used to specify ranges for qualities that act as conditions on a system/sensor's operation. For example, wind speed of 10-60m/s may be used as the condition on a SystemProperty, for example, to state that a sensor has a particular accuracy in that condition.
IRI: http://www.w3.org/ns/ssn/Deployment
Describes the Deployment of one or more Systems for a particular purpose. Deployment may be done on a Platform.
IRI: http://www.w3.org/ns/ssn/systems/DetectionLimit
An observed value for which the probability of falsely claiming the absence of a component in a material is beta, given a probability alpha of falsely claiming its presence.
IRI: http://esonetyellowpages.com/vocab/DopplerEffect
The Doppler effect (or the Doppler shift) is the change in frequency of a wave (or other periodic event) for an observer moving relative to its source.
IRI: http://www.w3.org/ns/ssn/systems/Drift
As a Sensor Property: a continuous or incremental change in the reported values of Observations over time for an unchanging Property under the defined Conditions.
As an Actuator Property: a continuous or incremental change in the true value of the acted on ActuatableProperty over time for an unchanging command under the defined Conditions.
IRI: http://www.w3.org/ns/sosa/FeatureOfInterest
The thing whose property is being estimated or calculated in the course of an Observation to arrive at a Result or whose property is being manipulated by an Actuator, or which is being sampled or transformed in an act of Sampling.
IRI: http://fixo3.eu/vocab/FixedPointOceanObservatory
IRI: http://esonetyellowpages.com/vocab/Frequency
IRI: http://www.w3.org/ns/ssn/systems/Frequency
The smallest possible time between one Observation, Actuation, or Sampling and the next, under the defined Conditions.
IRI: http://esonetyellowpages.com/vocab/HydroacousticCurrentMeter
IRI: http://esonetyellowpages.com/vocab/Infrared
Infrared (IR) is an invisible radiant energy.
IRI: http://www.w3.org/ns/ssn/Input
Any information that is provided to a Procedure for its use.
IRI: http://www.w3.org/ns/ssn/systems/Latency
The time between a command for an Observation (resp. Actuation) and the Sensor providing a Result (resp. the Actuator operating the Actuation), under the defined Conditions.
IRI: http://www.w3.org/ns/ssn/systems/MaintenanceSchedule
Schedule of maintenance for a System in the specified Conditions.
IRI: http://www.w3.org/ns/ssn/systems/MeasurementRange
The set of values that the Sensor can return as the Result of an Observation under the defined Conditions.
IRI: http://esonetyellowpages.com/vocab/MeasuringRange
IRI: http://www.w3.org/ns/sosa/ObservableProperty
An observable quality (property, characteristic) of a FeatureOfInterest.
IRI: http://www.w3.org/ns/sosa/Observation
Act of carrying out an (Observation) Procedure to estimate or calculate a value of a property of a FeatureOfInterest. Links to a Sensor to describe what made the Observation and how; links to an ObservableProperty to describe what the result is an estimate of, and to a FeatureOfInterest to detail what that property was associated with.
IRI: http://fixo3.eu/vocab/OceanObservatory
IRI: http://esonetyellowpages.com/vocab/OperatingDepth
IRI: http://www.w3.org/ns/ssn/systems/OperatingPowerRange
Power range in which a System is expected to operate in the specified Conditions.
IRI: http://www.w3.org/ns/ssn/systems/OperatingProperty
An identifiable characteristic that represents how the System operates under the specified Conditions. May describe power ranges, power sources, standard configurations, attachments and the like.
IRI: http://www.w3.org/ns/ssn/systems/OperatingRange
Describes normal OperatingProperties of a System under some specified Conditions. For example, to the power requirement or maintenance schedule of a System under a specified temperature range.
In the absence of OperatingProperties, simply describes the Conditions in which a System is expected to operate.
The System continues to operate as defined using SystemCapability. If, however, the SurvivalRange is violated, the System is 'damaged' and SystemCapability specifications may no longer hold.
IRI: http://www.w3.org/ns/ssn/Output
Any information that is reported from a Procedure.
IRI: http://esonetyellowpages.com/vocab/PartialPressure
IRI: http://esonetyellowpages.com/vocab/PartialPressureOfCO2Analyzer
IRI: http://www.w3.org/ns/sosa/Platform
A Platform is an entity that hosts other entities, particularly Sensors, Actuators, Samplers, and other Platforms.
IRI: http://www.w3.org/ns/ssn/systems/Precision
As a Sensor Property: the closeness of agreement between replicate Observations on an unchanged or similar Property value: i.e., a measure of a Sensor's ability to consistently reproduce an Observation, under the defined Conditions.
As an Actuator Property: the closeness of agreement between replicate Actuations for an unchanged or similar command: i.e., a measure of an Actuator's ability to consistently reproduce an Actuation, under the defined Conditions.
IRI: http://www.w3.org/ns/sosa/Procedure
A workflow, protocol, plan, algorithm, or computational method specifying how to make an Observation, create a Sample, or make a change to the state of the world (via an Actuator). A Procedure is re-usable, and might be involved in many Observations, Samplings, or Actuations. It explains the steps to be carried out to arrive at reproducible results.
IRI: http://esonetyellowpages.com/vocab/ProfilingRange
IRI: http://www.w3.org/ns/ssn/Property
A quality of an entity. An aspect of an entity that is intrinsic to and cannot exist without the entity.
IRI: http://schema.org/PropertyValue
A property-value pair, e.g. representing a feature of a product or place.
IRI: http://schema.org/QuantitativeValue
A point value or interval for product characteristics and other purposes.
IRI: http://www.w3.org/ns/ssn/systems/Resolution
As a Sensor Property: the smallest difference in the value of a ObservableProperty being observed that would result in perceptably different values of Observation Results, under the defined Conditions.
As an Actuator Property: the smallest difference in the value of an Actuation command that would result in a value change of the ActuatableProperty being acted on, under the defined Conditions.
IRI: http://www.w3.org/ns/ssn/systems/ResponseTime
As a Sensor Property: the time between a (step) change in the value of an observed ObservableProperty and a Sensor (possibly with specified error) 'settling' on an observed value, under the defined Conditions.
As an Actuator property: the time between a (step) change in the command of an Actuator and the 'settling' of the value of the acted on ActuatableProperty, under the defined Conditions.
IRI: http://www.w3.org/ns/sosa/Result
The Result of an Observation, Actuation, or act of Sampling. To store an observation's simple result value one can use the hasSimpleResult property.
IRI: http://www.w3.org/ns/sosa/Sample
A Sample is the result from an act of Sampling.
IRI: http://www.w3.org/ns/sosa/Sampler
A device that is used by, or implements, a Sampling Procedure to create or transform one or more samples.
IRI: http://www.w3.org/ns/sosa/Sampling
An act of Sampling carries out a sampling Procedure to create or transform one or more samples.
IRI: http://www.w3.org/ns/ssn/systems/Selectivity
As a Sensor Property: Selectivity is a Property of a Sensor whereby it provides observed values for one or more ObservableProperties such that the Results for each ObservableProperty are independent of other Properties in the FeatureOfInterest being investigated, under the defined Conditions.
As an Actuator Property: Selectivity is a Property of an Actuator whereby it acts on one or more ActuatableProperties such as the Results for each ActuatableProperty are independent of other Properties in the FeatureOfInterest being acted on, under the defined Conditions.
IRI: http://www.w3.org/ns/ssn/systems/Sensitivity
As a Sensor Property: Sensitivity is the quotient of the change in a Result of Observation and the corresponding change in a value of an ObservableProperty being observed, under the defined Conditions.
As an Actuator Property: Sensitivity is the quotient of the change in a command of Actuation and the corresponding change in a value of an ActuatableProperty being acted on, under the defined Conditions.
IRI: http://www.w3.org/ns/sosa/Sensor
Device, agent (including humans), or software (simulation) involved in, or implementing, a Procedure. Sensors respond to a stimulus, e.g., a change in the environment, or input data composed from the results of prior Observations, and generate a Result. Sensors can be hosted by Platforms.
IRI: http://esonetyellowpages.com/vocab/Speed
IRI: http://www.w3.org/ns/ssn/Stimulus
An event in the real world that 'triggers' the Sensor. The properties associated to the Stimulus may be different to the eventual observed ObservableProperty. It is the event, not the object, that triggers the Sensor.
IRI: http://www.w3.org/ns/ssn/systems/SurvivalProperty
An identifiable characteristic that represents the extent of the System's useful life under the specified Conditions. May describe for example total battery life or number of recharges, or, for Sensors that are used only a fixed number of times, the number of observations that can be made before the sensing capability is depleted.
IRI: http://www.w3.org/ns/ssn/systems/SurvivalRange
Describes survival capabilities of a System under some specified Conditions. For example, to the lifetime of a System under a specified temperature range.
In the absence of SurvivalProperties, simply describes the Conditions a System can be exposed to without damage. For example, the temperature range a System can withstand before being considered damaged.
The System continues to operate as defined using SystemCapability. If, however, the OperatingProperty is violated, the System is operating 'out of operating range' and SystemCapability specifications may no longer hold.
IRI: http://www.w3.org/ns/ssn/System
System is a unit of abstraction for pieces of infrastructure that implements Procedures. A System may have components, its subsystems, which are other systems.
IRI: http://www.w3.org/ns/ssn/systems/SystemCapability
Describes normal measurement, actuation, sampling properties such as accuracy, range, precision, etc. of a System under some specified Conditions such as a temperature range.
The capabilities specified here are those that affect the primary purpose of the System, while those in OperatingRange represent the system's normal operating environment, including conditions that don't affect the observations or the actuations.
IRI: http://www.w3.org/ns/ssn/systems/SystemLifetime
Total useful life of a System (expressed as total life since manufacture, time in use, number of operations, etc.) in the specified Conditions.
IRI: http://www.w3.org/ns/ssn/systems/SystemProperty
An identifiable and observable characteristic that represents the System's ability to operate its primary purpose: a Sensor to make Observations, an Actuator to make Actuations, or a Sampler to make Samplings.
IRI: http://esonetyellowpages.com/vocab/TemperatureRange
IRI: http://esonetyellowpages.com/vocab/WaterCurrent
IRI: http://esonetyellowpages.com/vocab/WorkhorseQuartermaster150kHzADCP
Teledyne RD Instruments Workhorse Quartermaster 150 kHz ADCP
IRI: http://www.w3.org/ns/sosa/actsOnProperty
Relation between an Actuation and the property of a FeatureOfInterest it is acting upon.
IRI: http://www.w3.org/ns/ssn/deployedOnPlatform
Relation between a Deployment and the Platform on which the Systems are deployed.
IRI: http://www.w3.org/ns/ssn/deployedSystem
Relation between a Deployment and a deployed System.
IRI: http://www.w3.org/ns/ssn/detects
A relation from a Sensor to the Stimulus that the Sensor can detect. The Stimulus itself will be serving as a proxy for some ObservableProperty.
IRI: http://www.w3.org/ns/ssn/forProperty
A relation between some aspect of an entity and a Property.
IRI: http://www.w3.org/ns/ssn/hasDeployment
Relation between a System and a Deployment, recording that the System is deployed in that Deployment.
IRI: http://www.w3.org/ns/sosa/hasFeatureOfInterest
A relation between an Observation and the entity whose quality was observed, or between an Actuation and the entity whose property was modified, or between an act of Sampling and the entity that was sampled.
IRI: http://www.w3.org/ns/ssn/hasInput
Relation between a Procedure and an Input to it.
IRI: http://www.w3.org/ns/ssn/systems/hasOperatingProperty
Relation from an OperatingRange of a System to a OperatingPropery describing the operating range of the System.
IRI: http://www.w3.org/ns/ssn/systems/hasOperatingRange
Relation from a System to an OperatingRange describing the normal operating environment of the System.
IRI: http://www.w3.org/ns/ssn/hasOutput
Relation between a Procedure and an Output of it.
IRI: http://www.w3.org/ns/ssn/hasProperty
Relation between an entity and a Property of that entity.
IRI: http://www.w3.org/ns/sosa/hasResult
Relation linking an Observation or Actuation or act of Sampling and a Result or Sample.
IRI: http://www.w3.org/ns/sosa/hasSample
Relation between a FeatureOfInterest and the Sample used to represent it.
has characteristics: inverse functional
IRI: http://www.w3.org/ns/ssn/hasSubSystem
Relation between a System and its component parts.
IRI: http://www.w3.org/ns/ssn/systems/hasSurvivalProperty
Relation from a SurvivalRange of a System to a SurvivalProperty describing the survival range of the System.
IRI: http://www.w3.org/ns/ssn/systems/hasSurvivalRange
Relation from a System to a SurvivalRange.
IRI: http://www.w3.org/ns/ssn/systems/hasSystemCapability
Relation from a System to a SystemCapability describing the capabilities of the System under certain Conditions.
IRI: http://www.w3.org/ns/ssn/systems/hasSystemProperty
Relation from an SystemCapability of a System to a SystemProperty describing the capabilities of the System.
IRI: http://www.w3.org/ns/sosa/hosts
Relation between a Platform and a Sensor, Actuator, Sampler, or Platform, hosted or mounted on it.
IRI: http://www.w3.org/ns/ssn/implementedBy
Relation between a Procedure (an algorithm, procedure or method) and an entity that implements that Procedure in some executable way.
IRI: http://www.w3.org/ns/ssn/implements
Relation between an entity that implements a Procedure in some executable way and the Procedure (an algorithm, procedure or method).
IRI: http://www.w3.org/ns/ssn/systems/inCondition
Describes the prevailing environmental conditions for SystemCapabilites, OperatingRanges and SurvivalRanges.
IRI: http://www.w3.org/ns/ssn/inDeployment
Relation between a Platform and a Deployment, meaning that the deployedSystems of the Deployment are hosted on the Platform.
IRI: http://www.w3.org/ns/sosa/isActedOnBy
Relation between an ActuatableProperty of a FeatureOfInterest and an Actuation changing its state.
IRI: http://www.w3.org/ns/sosa/isFeatureOfInterestOf
A relation between a FeatureOfInterest and an Observation about it, an Actuation acting on it, or an act of Sampling that sampled it.
IRI: http://www.w3.org/ns/sosa/isHostedBy
Relation between a Sensor, Actuator, Sampler, or Platform, and the Platform that it is mounted on or hosted by.
IRI: http://www.w3.org/ns/sosa/isObservedBy
Relation between an ObservableProperty and the Sensor able to observe it.
IRI: http://www.w3.org/ns/ssn/isPropertyOf
Relation between a Property and the entity it belongs to.
IRI: http://www.w3.org/ns/ssn/isProxyFor
A relation from a Stimulus to the Property that the Stimulus is serving as a proxy for.
IRI: http://www.w3.org/ns/sosa/isResultOf
Relation linking a Result to the Observation or Actuation or act of Sampling that created or caused it.
IRI: http://www.w3.org/ns/sosa/isSampleOf
Relation from a Sample to the FeatureOfInterest that it is intended to be representative of.
has characteristics: functional
IRI: http://schema.org/location
The location of for example where the event is happening, an organization is located, or where an action takes place.
IRI: http://www.w3.org/ns/sosa/madeActuation
Relation between an Actuator and the Actuation it has made.
IRI: http://www.w3.org/ns/sosa/madeByActuator
Relation linking an Actuation to the Actuator that made that Actuation.
IRI: http://www.w3.org/ns/sosa/madeBySampler
Relation linking an act of Sampling to the Sampler (sampling device or entity) that made it.
IRI: http://www.w3.org/ns/sosa/madeBySensor
Relation between an Observation and the Sensor which made the Observation.
IRI: http://www.w3.org/ns/sosa/madeObservation
Relation between a Sensor and an Observation made by the Sensor.
IRI: http://www.w3.org/ns/sosa/madeSampling
Relation between a Sampler (sampling device or entity) and the Sampling act it performed.
IRI: http://www.w3.org/ns/sosa/observedProperty
Relation linking an Observation to the property that was observed. The ObservableProperty should be a property of the FeatureOfInterest (linked by hasFeatureOfInterest) of this Observation.
IRI: http://www.w3.org/ns/sosa/observes
Relation between a Sensor and an ObservableProperty that it is capable of sensing.
IRI: http://www.w3.org/ns/sosa/phenomenonTime
The time that the Result of an Observation, Actuation or Sampling applies to the FeatureOfInterest. Not necessarily the same as the resultTime. May be an Interval or an Instant, or some other compound TemporalEntity.
IRI: http://www.w3.org/ns/ssn/systems/qualityOfObservation
Relation linking an Observation to the adjudged quality of the Result. This is complimentary to the SystemCapability information recorded for the Sensor that made the Observation.
IRI: http://schema.org/unitCode
The unit of measurement given using the UN/CEFACT Common Code (3 characters) or a URL. Other codes than the UN/CEFACT Common Code may be used with a prefix followed by a colon.
IRI: http://www.w3.org/ns/sosa/usedProcedure
A relation to link to a re-usable Procedure used in making an Observation, an Actuation, or a Sample, typically through a Sensor, Actuator or Sampler.
IRI: http://www.w3.org/ns/ssn/wasOriginatedBy
Relation between an Observation and the Stimulus that originated it.
IRI: http://www.w3.org/ns/sosa/hasSimpleResult
The simple value of an Observation or Actuation or act of Sampling.
IRI: http://schema.org/maxValue
The upper value of some characteristic or property.
IRI: http://schema.org/minValue
The lower value of some characteristic or property.
IRI: http://www.w3.org/ns/sosa/resultTime
The result time is the instant of time when the Observation, Actuation or Sampling activity was completed.
IRI: http://schema.org/value
The value of the quantitative value or property value node. For QuantitativeValue and MonetaryValue, the recommended type for values is 'Number'. For PropertyValue, it can be 'Text;', 'Number', 'Boolean', or 'StructuredValue'.
IRI: http://esonetyellowpages.com/vocab/746b9
IRI: http://esonetyellowpages.com/vocab/541de
IRI: http://esonetyellowpages.com/vocab/237d4
IRI: http://esonetyellowpages.com/vocab/2dfc4
IRI: http://esonetyellowpages.com/vocab/fc84e
IRI: http://esonetyellowpages.com/vocab/5c105
IRI: http://fixo3.eu/vocab/e00a1
Deep-sea, continuous monitoring station: it provides the longest oceanographic time series in the South Adriatic Pit (Eastern Mediterranean Sea). The observatory is composed by two moorings (surface buoy and sub-surface mooring line) and designed to monitor physical and biogeochemical processes in the water column from the surface down to the bottom (approximately 1220m). The E2-M3A surface buoy collects air/sea meteorological and physical measurements in the surface layer (2m depth). The secondary deep mooring instead, is equipped with current meters (RDI-ADCP and Seaguard-RCM), CTD’s with Dissolved Oxygen and optical sensors. New biochemical sensors (CO2 and pH) were deployed during the first year of the FiXO3 project to enhance the payload of the site.
IRI: http://fixo3.eu/vocab/31357
IRI: http://fixo3.eu/vocab/6711c
IRI: http://fixo3.eu/vocab/7deac
Array of moorings covering the entire water column and benthos with associated repeat ship occupations for process studies and collections not possible autonomously (eg benthic megafauna) Longest running multidisciplinary North Atlantic open ocean sustained observatory delivering atmospheric and physical and biogeochemical ocean datasets in near real-time.
IRI: http://fixo3.eu/vocab/a3369
IRI: http://fixo3.eu/vocab/f2aca
IRI: http://www.w3.org/ns/ssn/systems/
IRI: http://fixo3.eu/vocab/e2c91
IRI: http://fixo3.eu/vocab/45767
IRI: http://fixo3.eu/vocab/0195d
IRI: http://esonetyellowpages.com/vocab/78484
IRI: http://esonetyellowpages.com/vocab/6fd42
IRI: http://esonetyellowpages.com/vocab/f9211
IRI: http://esonetyellowpages.com/vocab/b2df3
IRI: http://esonetyellowpages.com/vocab/7e101
IRI: http://esonetyellowpages.com/vocab/c6563
IRI: http://esonetyellowpages.com/vocab/bbaf4
IRI: http://esonetyellowpages.com/vocab/651f2
IRI: http://esonetyellowpages.com/vocab/81485
IRI: http://www.w3.org/2004/02/skos/core#definition
IRI: http://purl.org/vocab/vann/preferredNamespacePrefix
IRI: http://purl.org/vocab/vann/preferredNamespaceUri
This HTML document was obtained by processing the OWL ontology source code through LODE, Live OWL Documentation Environment, developed by Silvio Peroni.
The closeness of agreement between the Result of an Observation (resp. the command of an Actuation) and the true value of the observed ObservableProperty (resp. of the acted on ActuatableProperty) under the defined Conditions.